Dado Woodworking

A Dado joint is made by cutting a piece out of the face of the wood. Groove a square or rectangular slot that that runs with the grain.

How To Make A Housing Dado Woodworking Woodworking Joints Wood Working For Beginners

Click image to enlarge.

Dado woodworking. The dado is an essential joint in cabinetmaking. The nice thing about this dado maker is that you can easily make it yourself. It only took me a few hours to make this dado maker.

Dado joints are often used to build cabinets and bookshelves. Dado a square or rectangular slot that runs across the grain. Dados also often referred to as trenches in the UK and Europe are slots that are cut into wood across the grain.

When closed the abrupt stop puts several pounds of stress on the joints again especially on the front. It can be cut many ways from table saw to hand saw. There is more than one right way.

A dado joint is made from a three-sided channel cut across the grain of one work piece. It is great to hide the joints and often be turned into a piece feature. How to make a Housing Dado Joint - The Three Joints - Paul Sellers - YouTube.

It doesnt extend over the entire board width and is stopped from the front edge by an amount equal to the material thickness. Drawer boxes are a great example of a need for high strength because theyre stressed twice with each use. Setting up this dado maker only takes a few seconds and the result is a perfect dado that fits every time.

A second mating work piece fits into the slot. A dado is a groove cut into one piece of wood into which another piece of wood will fit snugly. No matter what size of dados you need to cut.

A dado joint is a flat bottom channel that is cut to fit the width of another piece of wood. How to Make Dado Cuts with a Table Saw. Making dados has never been easier than with this dado maker.

This is a must-have skill for virtually any woodworker. The dado joint has been around nearly as long as woodworking. Most often they are used in cabinets in order to create reliable shelving supports.

Half blind dado or stopped dado. It runs over the entire width of a wood panel leaving the joint visible. While there is plenty of variation between projects on average a dado joint will end up being roughly 13 rd of the thickness of the wood.

Dado joints are easy to make using a table saw or router. This joint is nothing more than a groove. Making a proper dado cut takes some practice as well as the proper tools.

For instance when building a bookshelf using 34-inch-thick stock you might cut 34-inch-wide dado grooves into the shelf uprights and then glue permanent shelves into the grooves. However dado cuts also see use as drawer dividers and general-use partitions. If so a locking joint that combines a rabbet with a dado is the perfect solution.

Certainly a saw and chisel is all that is needed but setting a fence and just planing across the wood in a few quick strokes is really fast and incredibly satisfying. When suddenly opened the corner joints are pulled. My favorite these days is a dado plane.

Dado cuts see a whole host of applications in the woodworking field. The dado joint is one of the strongest woodworking joints you can make. They are perfect for supporting shelves in cabinets or dividers.

Text photos and video by Tom Hintz. Dados have been around almost as long as woodworking. Basic Anatomy Although these three joints may at first glance seem very similar they are in fact different and the approaches used to cut them will not be the same.

How To Build A Dado Sled For The Table Saw Table Saw Woodworking Projects Woodworking